人造板甲醛测试气候舱工作原理
环境舱的设计参考标准
Design reference standard of the environmental chamber
1美国测试和材料协会标准
(AMERICAN SOCIETY FOR TESTING AND MATERIALS,ASTM)
1.1测试voCs释放 Test on emission of voCs
a、ASTM D 5116-97《小尺度环境箱测定室内材料和产品中有机释放的标准指南》“Standard Guide for Small-Scale Environmental Chamber Determinations 0f Organic Emissions From Indoor Materials/Products"。
b、ASTM D 6330-98《规定测试条件下小型环境箱测定木制板材中VOCs(除甲醛)释放的标准操作》“Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions"。
c、ASTM D 6670-01《全尺度环境箱测定室内材料和产品VOCs中释放的标准操作》“Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products"。
1.2测试甲醛释放 Test on emission of Formaldehyde
a、E 1333—96《大型环境箱测定木制品释放气体中甲醛浓度和释放率的标准测试方法》“Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber"。
b、ASTM D 6007-02《小尺度环境箱测定木制品释放气体中甲醛浓度的标准测试方法》“Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber"。
2 欧洲标准 (CEN European Committee for Standardization)
a、ENV 13419-1《建筑产品—VOCs释放量的测定第1部分:释放测试环境箱方法》“Building products-Determination of the emission of volatile organic compounds-Part 1:Emission test chamber method"。
b、测试甲醛释放ENV 717-1《人造板甲醛释放量测量环境箱法》test on the Formaldehyde emission , “Wood-Based Panels Determination of Formaldehyde Release-Part 1:Formaldehyde Emission by the Chamber Method"。
3 中国标准:Chinese standard
a、测试VOCs释放:GB 18580-200 1《室内装饰装修材料—地毯、地毯衬垫及地毯胶粘剂有害物质释放*》中附录A(规范性附录):小型环境试验舱法。Test on emission of VOCs:GB 18580-200 1 “Indoor Decorating and Refurbishing Materials—Limitations of Harmful Substances Emitted from Carpets, Carpets Cushions and Adhesives" AppendixA (Normative Appendix): Small-Scale Environmental Chamber Determinations
b、测试甲醛释放GBl8580-2001《室内装饰装修材料——人造板及其制品中甲醛释放*》中6.4节:气候箱法测定饰面人造板甲醛释放量。
Test on emission of Formaldehyde: “Indoor Decorating and Refurbishing Materials—Limit of Formal Dehyde Emission of Wood-based Panels and Finishing Products" Section 6.4: Climate Chamber Determination of Dehyde Emission of Wood-based Panel Veneer.
4 其它标准:Other standards
ASTM D 5116-97
ASTM D 3237-00
ASTM D 6803-02
ASTM D 6007-02
ASTM D 6330-98
ISO 16000-6 INDOOR AIR-PART 6
JISA 1901
* 试验箱满足以下试验标准:
* Test chamber should satisfy the following test standards:
ASTM D 6007-02
加州ANSI/BIFMA X7.1-2007
California ANSI/BIFMA X7.1-2007
型号 | KLT-NT02 | KLT-NT1 | ||
标称内容积(升) | 225(1±2%) | 1000(1±2%) | ||
内部尺寸 (mm) | W | 550 | 850 | |
D | 600 | 1080 | ||
H | 680 | 1100 | ||
外部尺寸 (mm) | W | 1100 | 1460 | |
D | 796 | 1285 | ||
H | 1520 | 1572 | ||
性 能 | 温度范围 | 15~30 ℃ | ||
湿度范围 | 35~70 % RH | |||
温度偏差 | ≤ ±0.5 ℃ | |||
湿度偏差 | ≤ ± 2% RH | |||
温度均匀度 | ≤±0.8 ℃ | |||
湿度均匀度 | ≤ ±2 % RH | |||
温度波动度 | ≤ ±0.5℃ | |||
湿度波动度 | ≤ ± 2% RH | |||
换气率 | 0-1.5次/小时 | |||
密封性 | 舱内空气泄漏率<5%*供气率或加压1kpa过压,气体泄漏率少于0.5%舱容/min | |||
中心风速 | 0.1-1.0m/s(连续可调) | |||
相对正压 | 10±5pa | |||
加标回收率 | >80% | |||
本底值 | 甲醛:≤0.006mg/m3 | |||
温度控制方法 | 水循环间接控温法 | |||
湿度控制方法 | 干气、湿气比例双向调节法 | |||
材料 | 外壳 | Q235A冷轧钢板1.5mm,表面静电喷涂、白色 | ||
内箱 | SUS304镜面不锈钢1.5mm(8k镜面) | |||
绝热 | 高密度聚氨酯发泡+XPS | |||
密封 | 硅胶(食品级)、聚四氟乙烯 | |||
操作控制 | 显示器 | 7英寸彩色触摸屏,分辨率800x480,远程控制(可选) | ||
自动记录项目 | 温度、湿度、压力(可选)、流量(可选)、运行时间、故障记录 | |||
控制方式 | 温控:比例、积分、微分(P.I.D);系统控制:PLC+HMI | |||
分辨率 | 温度:0.1 ℃; 湿度:0.1% RH | |||
通讯接口 | 1个USB-A,一个USB-B,1个RS232,1个RS485,1个RJ-45(可选) | |||
粗存、记录功能 | 内存,U盘,SD卡 | |||
补水水质、周期 | 蒸馏水;>30天(连续运行) | |||
电源 | AC380(1±10%)V (50±0.5)Hz 三相四线+保护接地 | |||
装机容量(Kw) | 2.5 | 3.0 | ||
重量(Kg) | 280 | 320 | ||
噪音(dB) | ≤ 60dB | |||
系统保护 | 制冷系统高低压保护、过流保护;超温保护;电机过流保护;缺水保护;电源欠相、相序保护等等。 |